BALL BEARINGS
Deep groove ball bearing
Angular contact ball bearing 
Four point contact ball bearing
ROLLER BEARINGS
Cylindrical Roller Bearing,Single Row
Cylindrical Roller Bearing,Double Rows
Cylindrical Roller Bearing,Four Rows
Full Complement Cylindrical Roller
   Bearing (SL Series)
Tapered Roller Bearing,Single Row
Tapered Roller Bearing,Double Rows
Tapered Roller Bearing,Four Rows
Spherical Roller Bearing
AXIAL BEARINGS
Spherical Roller Thrust Bearing
Cylindrical Roller Thrust Bearing
Tapered Roller Thrust Bearing
Thrust Ball Bearing
SLEWING BEARING(Slewing Ring)
Four Point Contact Ball Slewing Bearing
Double-row Ball Slewing Bearing
Crossed Roller Slewing Bearing
Triple-row Roller Slewing Bearing
SPECIAL BEARINGS
Toroidal Roller Bearing(Carb Bearing)
Split Roller Bearing
Self-aligning Cylindrical Roller Bearing
ROLLERS AND CAGES
Cylindrical Rollers
Tapered Rollers
Spherical Rollers
Pressed steel cage


Thrust Ball Bearing

Bearings of this type consist of the washers with raceways and an assembly of ball and cage. The washer that contacts the shaft is called the shaft washer, and the one attached to the housing is called the housing washer. Thrust ball bearings are designed to accommodate thrust loads at moderate speeds, for practical purposes their radial load capacity is nil. The mounting is relatively simple as the washers and the ball and cage assembly can be mounted separately as Thrust ball bearings are separable.

Bearings with a sphered housing washer can be used together with a sphered seating washer to compensate for misalignment between the support surface in the housing and the shaft as itís important to keep the thrust bearings square with the shaft. However, the ability of the self-aligning seat to follow shaft wobble or misalignments is still quite limited.

Double direction thrust ball bearings characteristics are identical to those of the one-directional bearing, except it can accommodate axial loads acting in both directions and can thus serve to axially locate a shaft in both directions. To prevent adverse influence of centrifugal forces and gyration moments the single and double direction thrust ball bearings must be constantly subjected to a specific minimum load.

Capabilities range from 80mm(bore diameter) to 3500mm(outer diameter)

Accuracy: P0/P6/P5/P4

 

Wafangdian Weiyuan Bearing Manufacturings Co.,Ltd.